📋 Tender Overview
[ Safety Chain to be as per IS 3076:1984 Grade T (8) or latest. The specifications as
issued by RDSO(attached) are to be adhered to in their entirety except that the
nominal size (thickness) of the short link chain is to be 13 mm (+/- 0.5mm) to 14
mm (+/- 0.5 mm) and long links at ends with ring/suitable locking arrangement for
padlocking is to be of the length of 4.5 meters. Further, the length of the short link
chains is to be kept at 50 mm and width at 35 mm. These are electrically welded
round steel short link chains, fully heat treated and tested and comply with the
general conditions of acceptance of ISO 1834 or latest. The sizes range from 5 to 45
mm. (based on user requirement). The steel used shall be produced by the open
hearth or electric process, or by an oxygen blow process. It shall be steel alloy.
Marking shall be done as per IS 3076:1984 Grade T(8) or latest. Supplier shall
supply a certificate of test and examination carried out by the government owned
lab or NABL approved labs with every supply of chain. There should be name of the
chain maker, grade of material, size of chain, identification marking, proof force
applied to the whole chain. No. of test sample taken, breaking force of each sample,
total ultimate elongation at fracture, During manufacture the heat treated chain
shall be subjected to force of 60% of the minimum breaking force.] .#*