📋 Tender Overview
Supply, installation, testing and commissioning of 24 VDC Twin beam LED headlight .#* Supply, installation, testing and commissioning of 24 VDC Twin beam LED headlight as per
RDSO specification No. RDSO/2017/EL/SPEC/0134 (Rev.04) Ammendment-1. on various types of Track Ma
chines. RDSO specification No.RDSO/2017/EL/SPEC/0134(Rev.04) Ammendment-1 detailed as below:- (1).
Operating voltage should be nominal 24 vdc, minimum voltage 16 vdc and maximum working voltage 30
VDC (2). Power consumption should not be more than 100 watts at nominal operating voltage (3). The LE
D unit should have built-in Reverse polarity protection. (4). Bright Mode ( at distance of 8 mtr) = 7000 lux
minimum and 9000 lux ( max). Dim Mode (at a distance of 8 mtr) 900 lux (min) and 1200 lux (max). (5). L
ED headlight unit shall have IP-66 protection against water and dust. Manufacturer should provide certific
ate for same from any NABL/Govt approved lab. (6). Dye penetration test for detection of surface defects/
cracks on cracks shall be conducted as per IS:3658(latest). (7). Angle of the beam should be as per clause
12.6.5 of specification RDSO/2017/EL/SPEC/0134 (Rev.04) (8). Headlight be so designed that the failure of
one LED should not lead to failure of other LED (9) LED used should be of SMD/COB type only. Colour tem
perature of white colour LED shall be 3700K-5000K(white). Colour rendering index should be greater than
or equal to 80 (10) illumination intensity measurement shall not be less than 4.8 Lux in bright mode at a
distance of 305 metre (11) All kinds of tests as recommended in above mentioned specification to be carr
ied out. [ Warranty Period: 30 Months after the date of delivery ] ]