📋 Tender Overview
Large Area Uniform Industry Compatible Perovskite Solar Cell Technology
Luminosity Is An Industry Driven Project Aimed At Leveraging The Flexible Perovskite Solar Cells (Psc) Technology To Commercially Relevant Production Scales, Using Established Industrial Processes. The Objective Of The Project Is To Demonstrate Roll-To-Roll (R2R) Processed Photovoltaic (Pv) Module With Power Conversion Efficiency (Pce) Of >20% At An Area Of >900 Cm2, And Thus Overcome The Efficiency Gap Between Lab-Scale And Fab-Scale Processed Devices, Elevating The Trl Up To 7. One Of The Unique Selling Points Of This Work Is The Commercial Substrate Foil Based On Aluminum With Fluorinated-Tin-Oxide (Fto) Electrode Layer, Which Is An Intellectual Property Of Hyet Solar, The End User In The Consortium. By Using This Substrate Foil, Luminosity Will Alleviate The Bottlenecks Related To Limited Process Window Of Typical Polymer Substrate Foils – Such As High Quality Nickel Oxide Charge Transport Layer Deposition (Requires 300ºc Thermal Process) – To Reach High Stability, Efficiency, And Lower Environmental Impact, While Keeping The Flexibility. The Consortium Encompasses The Full Value Chain From Research And Technology Developers, Equipment Manufacturers, Suppliers, And Industrial End-Users. Together, We Are Well-Equipped To Surmount The Existing Challenges That Have Hindered The Widespread Adoption Of Psc Technology. Specifically, Luminosity Will Achieve Operational Stability Exceeding 20 Years That Rivals The Lifetime Of Current Commercial Thin Film Pv Technologies, While Ensuring Economic (0.14 Usd/W At R2R Production Scale) And Environmental Feasibility (50% Lower Co2 Foot-Print In Comparison To C-Si Pv), Substantiated By Comprehensive Life Cycle And Techno-Economic Analysis.
Luminosity Will Fast-Track The Market Uptake Of Flexible Perovskite Pv Technology And Thus Enable Rapid Increase Of Pv Installation Capacity In Eu To Reach The Goals Set By Repowereu Plan.
Funded Under
Climate, Energy And Mobility
Total Cost
€ 7 607 805,50
Eu Contribution
€ 6 996 063,13
Coordinated By
Nederlandse Organisatie Voor Toegepast Natuurwetenschappelijk Onderzoek Tno
Netherlands
Start Date
1 June 2024
End Date
31 May 2028
Objective
LUMINOSITY is an industry driven project aimed at leveraging the flexible perovskite solar cells (PSC) technology to commercially relevant production scales, using established industrial processes. The objective of the project is to demonstrate roll-to-roll (R2R) processed photovoltaic (PV) module with power conversion efficiency (PCE) of >20% at an area of >900 cm2, and thus overcome the efficiency gap between lab-scale and fab-scale processed devices, elevating the TRL up to 7. One of the unique selling points of this work is the commercial substrate foil based on aluminum with fluorinated-tin-oxide (FTO) electrode layer, which is an intellectual property of HyET Solar, the end user in the consortium. By using this substrate foil, LUMINOSITY
