📋 Tender Overview
Modern technology was used to build railway tunnels under Lodz. Katarzyna and Faustyna - TBM machines are at the stage of building proper tunnels. The safety of work and the area is supervised by a continuous monitoring system there are vibration measurements. The construction of underground connections between the d Fabryczna and Zabieniec and Kaliska stations is co-financed by the EU funds of OPI E. The investment will increase the capacity of railways.We are building an underground railroadTBM machines that work in the construction of an underground railway line - it is a modern safe and effective technology used in the world for the construction of railway and road tunnels. Each machine is adapted to local conditions - native land.Machines begin their work in circular-shaped starting chambers and finish their work in rectangular chambers. The process of starting the drilling requires setting the disc at the bottom of the hole at the appropriate level and passing through several rings of the housing set in the chamber to the chamber wall. An overpressure is created in front of the face of the disc which guarantees the stability of works at the tunnel.TBM chews through the cover of the starting chamber and begins to dig into the ground. The position of the disc is constantly monitored. Cyclical activities begin ground cutting - drilling tubing delivery and wall lining with tubings sealing and binding of the lining to the ground collection of the excavated material by dump trucks or conveyor belts transport to the outside. The soil from the construction of the cross-city tunnel in d will be used in the gravel pits in d Stoki.For the proper implementation of the tunnel there are a number of monitoring and control devices on the route including the most important parameters such as the direction of the disc movement and soil subsidence.The initial drilling phase has ended i.e. the technological start-up of the machines. Faustina and Katarzyna are in the chambers. The shields are at the stage of work in the ground outside the starting chambers - the stage of the tunnel implementation. Each of the discs works according to a proper controlled schedule.The TBM Katarzyna machine with a disc with a diameter of over 13 meters is boring a two-track tunnel from Stolarska Street to the d Fabryczna underground station. TBM Faustyna with a diameter of approx. 8.5 m will build four single-track tunnels that will connect the main tunnel with the d Kaliska and d abieniec stations.Supervision for safetyTBM technology minimizes the risks associated with works carried out in the vicinity of dense urban buildings. The special design prevents for example subsidence of land buildings landslides and vibrations. It also limits interference with the urban fabric and minimizes collisions with urban infrastructure energy heating gas water networks etc..The operation of the machines is supervised by specialized personnel. The information is monitored on the monitors in the cabin inside the TBM. At the same time the contractor monitors the area on an ongoing basis and performs vibration measurements. According to previously performed assessments the contractor strengthens the foundations of the selected buildings. In order to increase the safety of the residents of some properties several days stay away from their place of residence is planned. Information about the date of changing the accommodation is provided in advance. The temporary change is expected to be around 3-5 days. The flats will be secured around the clock.Tubings - elements of underground wallsTubings form the casing of the tunnel. They are transported from the factory in Mszczonw. With the help of specialized cranes they are lowered into the excavation and by internal transport they go to the assembly part of the TBM. Tubings form tight rings. The outer wall of the tunnel is connected to the ground by a special mortar that prevents subsidence.The contractor will allocate 13500 tubings for a double-track tunnel with a diameter of 12.7 m and a length of 3 km. For the construction of 4 single-track tunnels with a total length of 4.5 km 16400 tubings arranged in rings with a diameter of 8.5 m will be produced. More than 6100 tubings for the small shield and 4400 for the large shield were prepared. Others are constantly being produced.Three stops near dNew rdmiecie and Polesie stops are under construction. Diaphragm walls are installed at the d Polesie stop in the area of Ogrodowa and Karskiego streets. In this way the trench up to 30 m deep will be protected against landslides. The ceiling is made at the zero level. The bottom and intermediate slabs will be built successively.The area is being prepared at the d rdmiecie stop in the area of the intersection of Zielona Street with Zachodnia Street and Kociuszki Avenue. The works include among others disassembly of the tram track and overhead contact line. Geotechnical drilling is performed.The contractor includes in the project an additional third stop d Koziny working name.At Skarpowa Street and ul. Harvesting chambers are built disassembly and starting for the smaller TBM shield. At the branch chamber between the double-track and single-track tunnel at ul. The construction of diaphragm walls is being prepared for the textile workers.The tunnel connects PolandThe cross-city tunnel is a continuation of the construction of the d Fabryczna station which will become a transit station from the end station. Regional and long-distance trains will be able to travel through the very center of d - on the east-west axis via d Widzew Fabryczna and Kaliska stations and on the north-south axis via d Widzew Fabryczna abieniec stations.