📋 Tender Overview
With a cumulative power output of 348 billion kWh, the highest among power generating units in the country, Phu My Thermal Power Company continues to affirm its pivotal role in ensuring national energy security, especially in the context of the power systems increasing dependence on fluctuating renewable energy sources. Download Phu My Thermal Power Plant As of April this year, Phu My Thermal Power Company marked a special milestone when the total accumulated electricity output reached 348 billion kWh. This number not only shows the outstanding operating scale but also reflects the key role of Phu My Electricity Center in providing electricity for the economy and social life. Established in 1997, through many restructuring and development times, the Company is now managing and operating 13 power units with a total installed capacity of 2,540 MW. Factories such as Phu My 1, Phu My 2.1, Phu My 2.1 expansion and Phu My 4 are all equipped with modern technology from the worlds leading corporations such as Mitsubishi, GE or Siemens. The highlight in the operation of Phu My Thermal Power is the application of the combined cycle. By utilizing waste heat from the gas turbine to operate the steam turbine, the electricity generation efficiency is increased from about 35% to over 55-56% without needing to add additional fuel. This is considered a solution to optimize resources, while improving electricity production efficiency in the context of increasingly fluctuating fuel costs. Along with that, a fogging system is also deployed to reduce power loss due to high ambient temperature, helping to increase about 28 MW for each system when operating. These technical improvements contribute to maintaining the reliability and high availability of the generating units. Not only does it play a role as a large generation source, Phu My Thermal Power is also an important shield to help stabilize the national power system against the rapid increase of renewable energy. With quick start-up characteristics, gas turbine units often have to make adjustments to increase - decrease load, even stop and start continuously to compensate for fluctuations in solar power and wind power. According to Mr. Tran Huu Thanh, Deputy Director of the Company, in peak years, 13 power units have to make nearly 1,000 starts and stops. This shows that the pressure on moderation is huge, and at the same time poses a significant challenge to the equipments lifespan. Such flexible operation causes great thermal stress for the equipment, because the working temperature can reach more than 1,000 degrees Celsius. Continuous expansion increases the risk of material cracking and reduces component life, Mr. Thanh said. Besides operational challenges, technological factors are also worth noting. In gas thermal power plants, metal protective coatings often use ceramic materials with plasma technology, which plays a key role in ensuring durability and performance. However, currently Vietnam has not yet mastered this technology, making in-depth maintenance and material supply still dependent on foreign manufacturers. In the context of a sharp decline in domestic gas resources, from about 23 million m3/day to 7-8 million m3/day, the Company has proactively shifted to using liquefied petroleum gas (LNG). Through actual operation, LNG shows high compatibility with the existing system, without the need for major equipment renovation. Download Engineers at the dispatch room of Phu My Thermal Power - Photo: VGP/Vu PhongReady options to ensure fuel for the dry season To ensure fuel for the dry season, the Company has actively negotiated, increased gas supply and diversified LNG sources. LNG source from PV GAS is expected to increase to about 9.5 billion, and additional source from Hai Linh warehouse from May, contributing to increasing reserves and creating price competitiveness. At the same time, the oil backup plan is still maintained. Currently, the Company has 6 tanks, always ensuring a minimum inventory of about 20,000 - 30,000 m3 of DO oil, ready to operate in case the gas source is interrupted. Notably, to prepare for the peak of the dry season, the Company has proactively accelerated the equipment overhaul plan from August to be carried out as early as March. Inspection and maintenance work has also been enhanced to ensure that the power units are always in a high state of readiness. In terms of operation, power units can flexibly use both gas and oil, or combine the two types of fuel depending on dispatch requirements. Currently, the Phu My factory cluster can consume a maximum of about 10 million m3 of gas per day, equivalent to an electricity generation output of about 60 million kWh. Actual output in recent years has also increased sharply, from 20-25 million kWh/day to about 40 million kWh/day, reflecting the increasing demand for electricity. Under pressure from fuel costs, the Company also synchronously deployed energy saving solutions. The start-up time of the generator has been shortened from 60 minutes to 40 minutes, helping to significantly reduce fuel consumption. Many devices have been replaced with more efficient technology, and at the same time, electricity saving measures in the office block have also been seriously implemented. Anh Tho Read moreDrill for handling large fire situations at Phu My Thermal Power Plant