📋 Tender Overview
On Saturday May 6 a modern inspection system was installed to periodically monitor the state of the central section of the Paraguay-Brazil Integration Bridge a work financed by Itaipu Binacional and which is in the completion phase. Technicians from the Superintendence of Works of the Coordination Department of the Entity accompanied the procedure.The system consists of a 24 meter wide inspection car protruding from the road installed in the lower part of the metallic deck of the road connection and which slides through rails along the 470 meters long corresponding to the central section of the superstructure erected on the Paran River. With the help of the machine a periodic and exhaustive monitoring of the conditions of the bridge will be carried out.This procedure constitutes an important complement to the finishing work on the superstructure. All the details of the work to be corrected are carried out according to the norms and technical specifications required by the Brazilian consultant in charge of supervising the undertaking.Characteristics of the workThe Integration Bridge is of the mixed type concrete and metal cable-stayed it is 760 meters long with main columns 180 meters high and with a central span space between the two pillars through which the navigation channel passes of the river of more than 60 meters high above maximum floods of water.This superstructure consists of a total of 37 metallic voussoirs 18 on each side of the bridge added to a central voussoir whose placement represented the point of union of both ends.Its construction on the Paran River began in 2019 as a second connection route between Paraguay and Brazil at the height of the cities of Presidente Franco and Foz de Yguaz. Due to its strategic border location it is expected to generate economic dynamism for both countries creating a new pole of regional development.