📋 Tender Overview
The manufacture of casual shoes sneakers and sports shoes is a labor-intensive process involving numerous production steps. Many of these are still performed manually for example the application of the adhesive which is usually still done with a brush. When bonding the upper material and the outsole it is important to ensure exact dosing and very precise application at the correct location so that the sole does not come off and visibly excessive application is avoided. Hot-melt adhesives based on Covestros Desmomelt U thermoplastic raw material powder can now be applied automatically and in precise doses using digital printing.Polyurethane dispersions have proven their worth in adhesives for manual shoe production. But attempts to automate manual application with robot-assisted processes have not been successful to date.Digital printing on the other hand enables shoe manufacturers to automate adhesive application to the highest level of precision. This is significantly more effective and faster as processing steps can be saved and the precise digital application creates less waste that would need to be disposed of. The adhesive joints exhibit the same high quality as with the previous manual production.Digital adhesive application on smartphone displaysManufacturers of smartphones and other electronic devices must produce as leanly cost-efficiently and automatically as possible to remain competitive. In addition consumer purchasing decisions are increasingly influenced by whether products can be recycled at the end of their useful life. Covestro enables electronics manufacturers to efficiently apply hot-melt adhesives based on its Desmomelt U polyurethane adhesive raw material in a digital process. In the case of thermoplastic adhesives end-of-life recycling can also be facilitated.Covestro will present both developments during Digital Expo 2021 September 14-16. For more explanations join the webinar with experts Dr. Dirk Achten and Dr. Ann-Christin Bijlard-Jung on September 14 starting at 5 p.m. CEST.The application of adhesives to smartphone displays is often a time-consuming part of the manufacturing process. For example adhesive foils are applied that must be precisely cut beforehand. An analogous process is based on latently reactive 2-component hot-melt films which are still crosslinked after the joining process to create a particularly strong adhesive bond between the components. Due to the strong bond however disassembly at the end of the service life is often difficult.Efficient assemblyHot-melt adhesives based on Desmomelt U can be applied exactly where they are needed using digital printing. Automation of adhesive application reduces the number of processing steps required. Nevertheless complex CAD-based adhesive bonding paths are possible. After usage of the smartphone it is possible to disassemble components in a temperature-controlled manner if only thermoplastic raw materials have been used. If particularly strong adhesive bonds are required then the digital application of latent 2C reactive hot-melt adhesives based on Desmomelt U and Desmodur crosslinkers is also possible.The new adhesive raw materials based on Desmomelt U are aliphatic and thus protected against yellowing. They combine the advantages of water-based adhesives for example high molecular weight environmental compatibility and performance with the easy processability of hot-melt adhesives. The open time can be adapted to customers wishes which makes processing even more flexible.The project is part of a comprehensive program with which Covestro is systematically driving forward digitalization. One of the three pillars of the Digital@Covestro program is the development of new business models and digital technical services. One focus area is a more efficient production at customers and the digitization of entire value chains. The two other pillars of the program are focused on digital operating processes in the companys own production and the development and use of digital chemical trading platforms.
