📋 Tender Overview
Picosun Atomic Layer Deposition ALD has been demonstrated to be a suitable solution for protection of surfaces exposed to atomic oxygen degradation in Low Earth Orbit. High material survivability is a requirement for objects sent to space as they are faced with a number of degrading circumstances such as exposure to atomic oxygen.Researchers at the European Space Agency ESA have tested and analysed various material samples provided by Picosun to verify the protective coatings suitability for protection against atomic oxygen. This testing was performed in the ESTEC TEC-QEE Laboratory LEOX facility as part of an open lab test campaign. These campaigns are intended to provide access to ESAs unique space environmental test facilities and allow collaboration with ESAs research fellows especially for SMEs and institutes new to the space business.The test simulates the corroding effect of atomic oxygen for which satellites including the International Space Station ISS are exposed to. The results of the tests performed on Kapton HN polyimide film silicon pieces and PCBs Printed Circuitry Boards protected with Picosun ALD coating clearly demonstrated the erosion protection provided by the ALD coating. The demonstrated low temperature 125 C film was relatively thin 20 nm enabling coating of different relevant materials. Decreased thickness of ALD coating is known to withstand more deformation required for flexible materials than thick layers. Also ALD coating can be applied to a 3D surface with extreme aspect ratios. The analysis performed by ESTEC consisted of mass measurement Scanning Electron Microscope SEM inspection and thermo-optical properties measurement partially before and after the test.Atomic oxygen erosion has a major impact on the choice of external materials available for spacecrafts and satellites operating in Low Earth Orbit. Picosun ALD showed atomic oxygen resistance in the tests and forms a suitable protective coating for extreme environmental conditions applicable also for flexible materials explains Adrian Tighe Senior Materials Engineer in the Materials Physics and Chemistry Section at ESA.ALD is an advanced thin film coating method for ultra-thin highly uniform and conformal material layers. It has proved to be the coating solution of choice already in production in solutions and innovations operating in extreme environments. Today they can be found everywhere from deep seabed to Mars says Juhana Kostamo VP Industrial Business Area of Picosun Group.
