📋 Tender Overview
Within the framework of the environmental project "Virumaa waters clean" led by the Ministry of Climate, 400 cubic metres of contaminated soil will be treated on the territory of the former asphalt concrete plant in Pahnimäe from production residues that threaten the groundwater there. The cleaning works will start in August and will last for 14 months.
The former Pahnimäe asphalt concrete plant is located in Päide village, Rakvere Parish, Lääne-Viru County, in northeastern Estonia. The area is owned by LLC KMG. As the territory of the plant is still in use, the soil there must be cleaned without excavating it and removing it. For this purpose, an innovative solution is used by cleaning the soil in-situ, i.e. on site.
As a result of the public procurement, the works will be carried out by Maves OÜ together with the Finnish consulting company Nordic Envicon Oy. Contractors conducted experiments to find out the most suitable method of cleaning the soil. "The best results were shown by a combined experiment from the biological and dry cleaning method," said Artto Pello, project manager at Maves OÜ. "This means that contaminant levels are reduced in the ground using a combination of microbiological degradation and chemical oxidation," he added.
According to Raimo Jaaksoo, project manager of the Ministry of Climate, the cleaning works will be carried out through boreholes on site. "In the course of the remediation work, boreholes will be built on the territory of the plant. Through the pipes installed in the boreholes, the chemical oxidizer hydrogen peroxide is added to the soil, as well as the product Remsoil, which is made from the by-products of Finnish agriculture," Jaaksoo explained. "The nutrients in it stimulate the activity of microbes in the soil and accelerate the breakdown of harmful substances. Hydrogen peroxide is added to activate chemical reactions that break down pollutants in the soil," he added.
On the territory of the plant, soil and groundwater pollution has arisen during the production of asphalt concrete as a result of Soviet-era production technology and working culture. Sources of pollution have arisen from frequent accidents, leaks in the overfilling of tanks and the absence or low durability of concrete baths under the tanks. The plant still produces asphalt concrete today, but in the meantime, both the mixing nodes and other facilities have been updated.
In Soviet times, the asphalt concrete plant stored large quantities of oil and shale oil products. In the production of asphalt, petroleum bitumen was used as a binder, cockermite as a bulking agent. Shale oil was used for heating the boiler house and also for the manufacture of oil shale bitumen. The import of oil bitumen and shale oil was carried out by road transport. Unlike oil bitumen, which was used in the production of asphalt, oil shale bitumen went to surface road surfaces and make black coating on site.
"Due to the reckless attitude of the Soviet era to the natural environment, we still need to clean up such residual pollution sites that pollute our soil and groundwater," said Antti Tooming, undersecretary of the Ministry of Climate Affairs. "Thanks to advances in technology, we are able to do this smarter and more economically to re-use these areas," he added.
The efficiency of the healing works is monitored on a monthly basis by taking soil samples and analysing the polycyclic aromatic hydrocarbon content. As a result of cleaning 400 cubic meters of soil, an estimate can be made of the estimated cost and time spent on securing the entire object.