📋 Tender Overview
Contract awarded for Welding equipment for mechanized welding lot-0000, title: welding equipment for mechanized welding, description: gasunie has assets that need to be welded during maintenance and rerouting. this is regularly done on gas-carrying / pressure-holding pipelines. for this, gasunie needs welding equipment for mechanized welding. the welds made are critical for gas transport in the netherlands and are performed on pipelines that are in operation. this means that the control of the welding parameters and the accuracy of the welding equipment must be of the highest quality. this welding equipment is also used in case of emergencies and under heavy conditions in outdoor settings. this means that the welding equipment must be robust. in case of malfunctions, the contractor must be able to provide support in a short time. for the welding process, filled wires are used. the current welding method qualifications must be able to be executed with the mechanized welding system. in particular, for welding a split-t on a gas-carrying pipeline, welding is done with a basic filled wire that must achieve a full penetration. the system must be suitable for welding longitudinal seams (v-bevel 15 to 60 mm plate thickness) and circumferential seams (corner weld with open root, leg length from 10 mm to 40 mm). execution of the existing lmk's. material and filler material are supplied by gasunie for gas-carrying welding (longitudinal seam 30 mm p460q and circumferential seam 20 mm p460q). the result must meet the qualification requirements of the nsw-04 rev.9. a. for longitudinal seams (pa, pe, and pc) and circumferential seams (ph) (from dn450 – dn1400). in the execution of the equipment, no vulnerable elements, such as unprotected circuit boards, may be present in the design. the system must be simple and robust in construction to enable use in the field. the welding system must be set up in such a way that the position of the torch is adjustable depending on the clock position around the pipe. the angle and distance of the torch must be adjustable during welding via the control software to optimize the shape of the weld pool. the manageability of the system, weight, and volume must allow for ergonomic use. the distance between the power source and the weld to be produced is a maximum of 25 meters. the welding equipment must be equipped with an emergency stop. the system must be delivered with certificates, including ce/3140, fat certificate, and must comply with the machinery directive. including training in dutch for gasunie's welders. the system must be able to be built into 40 ft containers. wear parts will be added for the first year. maintenance and service execution is possible. software update(s) are included for a minimum of 3 years with this purchase. the delivered software must have the same lifespan as the welding equipment. blocking of software during the lifespan is not allowed. 6 welding machines that minimally meet the requirements in the above description. estimated value excluding vat: 795600.00 eur.Welding equipment for mechanized welding