📋 Tender Overview
Contract awarded for The service of successive collection, transport, and management of waste classified under waste code 19 12 12 – other waste (including mixed substances and items) from the mechanical processing of waste other than those listed in 19 12 11. lot-0001, title: cz. 1 service for the successive collection, transport, and management of waste classified under waste code 19 12 12 – other waste (including mixed substances and items) from the mechanical processing of waste other than those listed in 19 12 11, description: 1. the subject of the order is - under the conditions described in the contract to be concluded between the ordering party and the contractor, swz, and in the contractor's offer - the successive collection, transport, and management of waste collected by the contractor from the ordering party classified under code 19 12 12 – other waste (including mixed substances and items) from the mechanical processing of waste other than those listed in 19 12 11 divided into 3 parts, in types and quantities specified below. 2. the waste may only be subjected to recovery processes r1 and/or r12, in accordance with the definition of these processes in the waste act of december 14, 2012 (consolidated text: journal of laws of 2023, item 1587, as amended) / regulation of the european parliament and council (eu) 2024/1157 of april 11, 2024, on the movement of waste, amending regulations (eu) no. 1257/2013 and (eu) 2020/1056 and repealing regulation (ec) no. 1013/2006 (journal of laws eu l 2024.1157), whereby 'subjecting to the recovery process' means the commencement and completion of this process. 3. the subject of the order includes: 1) part no. 1 – consisting of a fraction of ballast waste with energy value from the sorting process of municipal waste in the amount of 4000 mg (+/-) 10 mg (quantitative differences may arise from storage conditions and from the technical and technological solutions of the weighing system used), but not less than 2000 mg (minimum provision). packaging of waste: bulk waste. 2) part no. 2 – consisting of a fraction of ballast waste with energy value from the sorting process of municipal waste in the amount of 4000 mg (+/-) 10 mg (quantitative differences may arise from storage conditions and from the technical and technological solutions of the weighing system used), but not less than 2000 mg (minimum provision). packaging of waste: bulk waste. 3) part no. 3 – consisting of a fraction of ballast waste with energy value from the sorting process of municipal waste in the amount of 4000 mg (+/-) 10 mg (quantitative differences may arise from storage conditions and from the technical and technological solutions of the weighing system used), but not less than 2000 mg (minimum provision). packaging of waste: bulk waste. 4. waste collection: 1) the transfer and collection of waste will occur solely based on and in accordance with written (under penalty of nullity) individual orders from the ordering party directed to the contractor and delivered by electronic mail, specifying the quantity of waste and the date on which the ordering party expects its collection. 2) the ordering party will place individual orders when the amount of waste accumulated by them to be collected in one day will be at least 16 mg, 3) the contractor will collect waste while maintaining the following technical infrastructure requirements at the ordering party's facility: a) the gross weight of a single vehicle entering (empty vehicle for loading) the ordering party's facility must not exceed 18 tons b) the distance between the extreme axes of a single vehicle must not exceed 16 meters in length, and the length of the vehicle must not exceed 18 m c) the loading of waste transferred in bulk takes place 'from above' 4) after weighing the vehicle loaded with waste, the ordering party will issue a document of release from the warehouse. 5) the ordering party will prepare a waste transfer card [kpo] for each batch of waste collected from their facility by the contractor's transport. these cards will be issued in accordance with the waste act. the contractor will be responsible for confirming by the facility operator, in which the recovery process will be conducted, the mass and type of waste specified in each waste transfer card issued by the ordering party, in accordance with the waste act. 6) if the movement of waste is of an international nature, documents specified in the regulation of the european parliament and council (eu) 2024/1157 of april 11, 2024, on the movement of waste, amending regulations (eu) no. 1257/2013 and (eu) 2020/1056 and repealing regulation (ec) no. 1013/2006 will be prepared. documents will be prepared in accordance with the requirements of the aforementioned regulation. 4. based on article 16b, paragraph 2 of the public procurement law, the ordering party informs that it does not allow the submission of offers involving supplies or services from third countries that are not parties to international agreements. an offer covering supplies or services from third countries that are not parties to international agreements will be rejected based on article 226, paragraph 1, point 5 of the public procurement law: 'the ordering party rejects the offer if its content is inconsistent with the conditions of the order.' estimated value excluding vat: 6815340.00 pln.The service of successive collection, transport, and management of waste classified under waste code 19 12 12 – other waste (including mixed substances and items) from the mechanical processing of waste other than those listed in 19 12 11.