📋 Tender Overview
Contract awarded for Supplies of disposable materials, medical and non-medical products for the 'poddebice health center' ltd. in poddebice. { "detected_language": "polish", "translated_text": "lot-0002, title: package no. 2, description: 1. device for infusing fluids, two-part drip chamber with a soft lower part and a hard upper part with a length of at least 7 cm, drain length at least 150 cm, infusion filter min. 15 µm, air vent with a flap, roller flow regulator, drip chamber and drain free of phthalates, manufacturer's name on the device. filter efficiency minimum bfe 99.9999% vfe 99.999% according to standard astmf2100 astm f2101. in the roller clamp, a place for suspending the end of the drain and a cover for the device spike after use. pcs. 150,000. the ordering party requires the submission of 3 samples for item 1. the ordering party requires that the disposable materials in the above-mentioned package have the following characteristics, which will be verified based on the above-mentioned samples: 1. must not leak. 2. must not suck air. 3. after the infusion is completed, it maintains the fluid level in the drain. lot-0004, title: package no. 4, description: 1. safe polyurethane intravenous cannula with passive safety technology, plastic equipped with capillaries or metal latch protecting personnel from accidental puncture with an upper port with a self-closing cap or manually closing with the possibility of locking against accidental opening with a backflow valve (or hemostatic and hydrophobic membrane) preventing backflow of blood at the moment of puncture and preventing reuse of the mandrel, guiding needle with a side hole or without, contrasting in x-ray (min 4-6 stripes). free of pvc and latex. clinical studies or lab confirmed biocompatibility of polyurethane. packaging type tyvek or blisters secured against loss of sterility. sterilized by radiation or ethylene oxide. available in sizes: 0.9(22g)x25mm, flow min 36 ml/min; 1.1(20g)x25mm-33mm, flow min. 61ml/min; 1.3(18g)x32-33mm, flow min. 103ml/min; 1.3(18g)x45mm, flow min. 96ml/min; 1.5(17g)x45mm, flow min 128ml/min; 1.7-1.8(16g)x45mm-50mm, flow min. 196ml/min; 2.0-2.2x45mm, flow min 270ml/min pcs. 45,000 2. stopper for cannulas - from the same manufacturer as the cannulas, removed from the individual packaging in an aseptic sterile manner, containing at least the manufacturer's information on the smallest factory unit packaging regarding the batch/lot number, expiration date, while the bulk packaging has the manufacturer's labeling, sterile, closing the lumen of the cannula with an internal element entering the lumen of the cannula hidden below the edge of the stopper pcs. 80,000 lot-0008, title: package no. 8, description: 1. needle for spinal anesthesia (atraucan type) 26g packed together with a guide 20g x 35mm pcs. 300 2. needle for spinal anesthesia (pencan type) 25g x 88 mm packed together with a guide. in the needle holder, a prism signaling the appearance of fluid by a color change. handle with an elliptical cross-section with 4 windows. pcs. 3,600 3. needle for spinal anesthesia with quincke bevel 0-45 - 0.53 x 120-125 mm 25g, 26g, 0.40x88mm 27g single-use type spinocan. in the needle holder, a prism signaling the appearance of fluid by a color change. handle with an elliptical cross-section with 4 windows. pcs. 500 4. spinocan type needles, single-use, 18g x 3 ½ pcs. 350 5. central venous catheterization set using the seldinger method; with a four-channel catheter with needle v, diameter 8f length 20 cm, or 15 cm, with antibacterial material and hydrophilic coating along the entire length of the catheter (inside and outside) lumen channels 16ga/18ga/18ga/14a with a titanium-nickel guide with shape memory, with the possibility of locating the catheter using ecg reading, sterile. additional elements of the set: scalpel, three-part syringe, seldinger needle, non-coring ports to secure each channel, movable wing securing, dilator. small elements of the set, apart from the guide and catheter, packed in a separate bag, protecting against spillage during opening of the set. channel closures with automatic non-coring valves. pcs. 250 lot-0047, title: package no. 47, description: 1. calibrated drain with volumetric pump infusomat compactplus (confirmed by the pump's operating instructions), short silicone element on the drain calibrated with the pump mechanism. on the silicone section, graphic marking excluding the possibility of longitudinal twisting. drip chamber marked with the manufacturer's name. drain equipped with a filter with a 15µm membrane in the drip chamber, automatically stopping the infusion after emptying the drip chamber, preventing air from entering the system. hydrophobic valve protecting the end of the drain from fluid leakage. flushing, with an additional non-coring valve above the drip chamber, free of pvc. intended for administering a single cytostatic with the possibility of flushing the line, administering a estimated value excluding vat: 9000.00 pln.Supplies of disposable materials, medical and non-medical products for the 'poddebice health center' ltd. in poddebice.