📋 Tender Overview
Contract awarded for Delivery of laboratory equipment for the needs of a university of food technology, for 16 separate positions { "detected_language": "bulgarian", "translated_text": "lot-0001, title: delivery of laboratory equipment intended for the implementation of administrative contract no. kp-06-n86/8 for a project on the topic: \"interconnections between the phytochemical, microstructural, and functional characteristics of physically modified tomato pressings\" - chemical furnace 1 piece, description: characteristics and parameters of the equipment: - external dimensions: length – between 1200 and 1300 mm (limited between the minimum desired and available space); width – no more than 900 mm (limited by the size of the door). control panel: - contact 220 v/16 a – 2 pcs. (ip 44); - ventilation buttons (start and stop); - lighting switch 220 v/10 a; - explosion and acid-resistant led lighting with protective glass – triplex unbreakable - (ip 67) – 2 pieces; - the working chamber has bottom and top gas extraction; - the chamber must be resistant to: nitric acid, hydrochloric acid, sulfuric acid, alkaline solutions, and organic solvents; - the chamber is resistant up to a minimum of 250 °c; - ceiling – acid-resistant; - when extracting gases, there should be a chamber made of acid-resistant material at the back of the furnace for directing the gases into an exhaust pipe. the condensed vapors are directed into the sewage pipe; - the outer walls must be made of acid-resistant panel; - chemically resistant countertop with a border - against spillage; - movable “guillotine” wing with a locking mechanism - vertically lifting. glass made of triplex (unbreakable glass); - a high-pressure nitrogen valve must be mounted at the back; - movable ventilated cabinet (acid-resistant) under the working chamber of the furnace for storing chemicals. divided into two with a transverse partition; - centrifugal acid-resistant fan (pp) - not less than 1000 m³/h; - without sink; - installation of the aspiration – air duct not less than 3 m. the minimum warranty period for the proposed laboratory equipment must be no shorter than 12 months from the date of signing the protocol for commissioning. the maximum delivery time for the equipment is 60 calendar days. the time for eliminating any damages is up to 72 hours. in case of the need for the delivery of spare parts or the occurrence of a malfunction in the delivered equipment that requires prolonged repair activities, the maximum time for eliminating the malfunction is up to 15 calendar days. the laboratory equipment is intended for the implementation of administrative contract no. kp-06-n86/8 for a project on the topic: \"interconnections between the phytochemical, microstructural, and functional characteristics of physically modified tomato pressings\" lot-0010, title: delivery of laboratory equipment intended for the implementation of project kp-06-pn76/7 - multiparametric modular system for ph/orp/ise, electrochemical conductivity, and dissolved oxygen – 1 piece, description: characteristics and parameters of the equipment: 1. multiparametric modular system offering = four different measuring modules for ph/orp, ph/orp/ise, do, and ec; 2. minimum 7-inch color touchscreen with multitouch support and resolution = 800 x 480p; 3. the screen should be able to display up to 3 parameters simultaneously, views can be mixed and matched; 4. ph measurement range of at least -2.000 ph to at least 20.000 ph; 5. resolution for ph measurement of at least 0.001 ph; 6. accuracy of ph measurement of at least ±0.002 ph; 7. mv measurement range of at least -2000.0 mv to at least 2000.0 mv; 8. resolution for mv measurement of at least 0.1 mv; 9. accuracy of mv measurement of at least ±0.2 mv; 10. conductivity measurement range of at least 100.0 to 999.9 µs/cm; 100.0 to 1000.0 ms/cm; 11. resolution for conductivity measurement of at least 0.001 µs/cm; 12. accuracy of conductivity measurement of at least ±0.010 µs/cm; 13. measurement range for resistivity 1.0 to = 99.9 ?·cm; 100 to = 999 ?·cm; 14. resolution for resistivity measurement 0.1 ?·cm; 1 ?·cm; 15. accuracy of resistivity measurement ±1 ?·cm; 16. must have 1 usb-c port, 2 usb-a ports, ethernet port, peripheral device port (rs232), 2 stirrer ports (left and right), up to 3 modular slots specific to the application; 17. ability to store at least 1,000,000 data points per user with an automatic interval of at least 1 second to 180 minutes and an option for export in csv file format; 18. powered by a dc adapter 100-240 vac to 24 vdc 2 a; 19. must be usable for conductivity measurements necessary for preparing water for injection (wfi) according to usp; 20. must have the ability for automatic verification that temperature, conductivity, and stability are within usp limits; 21. the device must be equipped with one ph/ise module and one ec module, ph electrode, temperature probe, starter kit for ph calibration, ec probe, starter kit for ec calibration, electrode holder, and quality certificate for the estimated value excluding vat: 9600.00 eur.Delivery of laboratory equipment for the needs of a university of food technology, for 16 separate positions